home products Fiber OpticFiber Optic CableOutdoorStranded Loose Tube Armored Optical Fiber Cable(GYTY53)
Stranded Loose Tube Armored Optical Fiber Cable(GYTY53)
.jpg)
- Add Product to Favorites
- Add Company to Favorites
Product Details:
| Model Number | OS1-OB-XX |
|---|---|
| Minimum Order Quantity: | 1 Kilometer/Kilometers |
| Packaging Details: | 2km/roll |
Detailed Product Description
OM1 Stranded Loose Tube Armored optical fiber Cable
A steel wire, sheathed with polyethylene
Water-resistant filling compound
OM1 Stranded Loose Tube Armored optical fiber Cable
The fibers, 250µm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. The cable core is filled with the filling compound to protect it from water ingress, over which a thin PE inner sheath is applied. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.
Features:
- Good mechanical and temperature performance
- High strength loose tube that is hydrolysis resistant
- Special tube filling compound ensure a critical protection of fiber
- Crush resistance and flexibility
- The following measures are taken to ensure the cable watertight:
- Steel wire used as the central strength member
- Loose tube filling compound
- 100% cable core filling
- PSP enhancing moisture-proof
- Water-blocking material
- Complies with Standard YD/T 901-2001 as well as IEC 60794-1.
Electrical Characteristics:
| Geometry Characteristics | ||
| Core Diameter(μm) | 62.5±2.5 | |
| Cladding Diameter(μm) | 62.5±1.0 | |
| Cladding Non-Circularity(%) | ≤1.0 | |
| Coating Diameter(μm) | 245±7 | |
| Coating/Cladding Concentricity Error(μm) | ≤12.0 | |
| Coating Non-Circularity(%) | ≤6.0 | |
| Core/Cladding Concentricity Error(μm) | ≤1.5 | |
| Delivery Lengty(km/reel) | Up to 17.6 | |
| Optical Characteristics | ||
| Attenuation(dB/km) | 850nm | ≤2.7 |
| 1300nm | ≤0.6 | |
| Minimum Modal Bandwidth(MHz.km) | 850nm | ≤200 |
| 1300nm | ≥600 | |
| Numerical Aperture | 0.275±0.015 | |
| Group Refractive lndex | 850nm | 1.496 |
| 1300nm | 1.491 | |
| Zero Dispersion Wavelength(μm) | 1320-1365 | |
| Zero Dispersion Slope(ps/(nm2.km) | ≤0.097 | |
| Macrobending induced loss | 850nm | ≤0.50 |
| 100 tum @ 60 mm dimeter | 1300nm | ≤0.50 |
| Backsctter Characteristics(1300nm) | ||
| Step(Mean of bidirectional measurement)(dB) | ≤0.10 | |
| Lrregularities over fibre length and point discontinuity(dB) | ≤0.10 | |
| Attenuation uniformity(dB/km) | ≤0.10 | |
| Environmental Charcteristics(850nm&1300nm) | ||
| Temperature dependence inducad attenuation | ||
| at-60°Cto+85°C(dB/km) | ≤0.10 | |
| Dry heat aging at85°C(dB/km) | ≤0.10 |
Material:
Jacket material: PE
Fiber Type Option:
- OS1-9/125 G-652.D Single mode fiber
- OM1-62.5/125 Multimode fiber
- OM2-50/125 Multimode fiber
- OM3-50/125 Multimode fiber
- OM4-50/125 Multimode fiber